Page 121 - дсрт

121
43. Chi-Ming Lin. Microstructure and wear characteristics of high-carbon Cr-based

alloy claddings formed by gas tungsten arc welding (GTAW)/ Chi-Ming Lin,

Chia-Ming Chang, Jie-Hao Chen, Chih-Chun Hsieh, Weite Wu // Surface &

Coatings Technology 205 (2010) 2590 – 2596

44. Chi-Ming Lin. Hardness, toughness and cracking systems of primary

(Cr,Fe)23C6 and (Cr,Fe)7C3 carbides in high-carbon Cr-based alloys by

indentation / Chi-Ming Lin , Chia-Ming Chang , Jie-Hao Chen , Weite Wu //

Materials Science and Engineering A 527 (2010) 5038–5043

45. Petrovic S.T. The effect of boron on the amount and type of carbides in

chromium white irons / Petrovic S.T, Markovic S.V, Zec S //. Journal of the

Serbian Chemical Society 2002;67(10):697–707.

46. Berns H. Abrasive wear resistance and microstructure of Fe–Cr–C–B hard

surfacing weld deposits / Berns H, Fischer A // Wear 1986;112:163–80.

47. Liu HY. Microstructure and properties of Fe–Cr–C hard facing alloys

reinforced with TiC-TiB2 / Liu HY, Yu FB, Meng QS, Chen SP, Wang H //

Science and Technology of Welding and Joining 2012;17:419–23.

48. Wang Q. Effects of Nb, V, and W on microstructure and abrasion resistance of

Fe–Cr–C hard facing alloys / Wang Q, Li X // Welding Journal 2010;89:133–9.

49. Sapate S. G. Experimental investigation of hardfaced martensitic steel under

slurry abrasion conditions / Sapate SG, Selokar A, Garg N // Mater Design

2010;31(8):4001–6.

50. Sorour A.A. Understanding the solidification and microstructure evolution

during CSC-MIG welding of Fe–Cr–B-based alloy / Sorour A.A. R.R.

Chromik, R. Gauvin, I.-H. Jung, M. Brochu / Materials Characterization 86 (

2013) 127 – 138.

51. Chia-Ming Chang. Microstructure and wear characteristics of hypereutectic Fe–

Cr – C cladding with various carbon contents / Chia-Ming Chang, Li-Hsien

Chen, Chi-Ming Lin, Jie-Hao Chen, Chih-Ming Fan, Weite Wu // Surface &

Coatings Technology 205 (2010) 245– 250.

52. M.H. Korkut. Effect of aging on the microstructure and toughness of the

interface zone of a gas tungsten arc (GTA) synthesized Fe–Cr–Si–Mo–C coated