Page 331 - Докторська дисертація_Ткачук

331

65. Zhang L., Shao M., Wang Z. et al. Comparison of tribological properties of

nitrided Ti-N modified layer and deposited TiN coatings on TA2 pure

titanium. Tribology International. 2022. Vol. 174. Article No. 107712.

66. Sun W., Song Z., Liu H. et al. Effect of surface nanocrystallization

pretreatment on the microstructure and fretting wear of Ti-6Al-4V titanium

alloy plasma nitrided layer. Materials Characterization. 2025. Vol. 223.

Article No. 114884.

67. Aires M.M., Naeem M., Melo-Silveira R.F. et al. A comparative investigation

of plasma nitriding and oxynitriding treatment on cells and bacterial

interaction on titanium surfaces. Materials Chemistry and Physics. 2025.

Vol. 339. Article No. 130716.

68. Lai T., Gao H., Gao Y. High-efficiency low-temperature active screen plasma

nitriding by bias voltage optimization of Ti-6Al-4V titanium alloy. Thin Solid

Films. 2025. Vol. 825. Article No. 140717.

69. Xing Y., Wang G., Zhang Y. et al. Development in plasma surface diffusion

techniques of Ti-6Al-4V alloy: a review. International Journal of Advanced

Manufacturing Technology. 2017. Vol. 92. P. 1901–1912.

70. Cekada M., Panjan P., Drnovsek A. et al. Increase of coating thickness on

sharp edges, deposited by cathodic arc evaporation. Surface and Coatings

Technology. 2021. Vol. 405. Article No. 126691.

71. Shen H.Y., Wang L. Formation, tribological and corrosion properties of

thicker Ti-N layer produced by plasma nitriding of titanium in a N2-NH3

mixture gas. Surface and Coatings Technology. 2020. Vol. 393. Article

No. 125846.

72. Rossi M.C., Kuroda P.A.B., de Almeida L.S. et al. A detailed analysis of the

structural, morphological characteristics and micro-abrasive wear behavior of

nitrided layer produced in α (CP–Ti), α+β (Ti–6Al–4V), and β (TNZ33) type

Ti alloys. Journal of Materials Research and Technology. 2023. Vol. 27.

P. 2399–2412.